產品介紹：Micropilot FMR60是首臺設計符合IEC 61508國際功能安全標準的80 GHz雷達。非接觸式雷達采用水滴式天線、改進型算法和小波束角，具有**可靠性?？梢赃M行液體、漿料和污泥的非接觸式連續液位測量。測量結果不受介質變化、溫度波動、氣相層或蒸汽的影響。此外，它還配備了Heartbeat Technology (心跳技術)智能傳感器功能。硬件和軟件設計符合IEC 61508標準，在冗余結構系統中可以實現**安全性SIL3Heartbeat Technology (心跳技術)確保設備在其整個生命周期內經濟、安全運行HistoROM數據管理理念實現快速簡便的調試、維護和診斷小波束角和多路回波跟蹤算法確保在內部安裝有障礙物的容器中的測量具有**可靠性80 GHz雷達能夠更加便捷地集成至過程中，降低了設計工作量創新的水滴式天線采用PTFE材質，具有**系統適用性世界上*簡單針對SIL的proof test理念以及WHG，節省了時間和成本80 GHz水滴式天線可以在自由空間中測量，**量程為50 m，具有高度集中的波束角，適用于在容器內有多個干擾物的應用。過程連接：螺紋或法蘭溫度：-40...+130°C (-40...+266°F)壓力：–1...+16 bar (–14.5...+232 psi)測量范圍：Max. 50 m (164 ft)測量精度：±1 mm (0.04 in)W波段：80GHz提供國際防爆證書、溢出保護認證WHG、SIL、船級認證、5點線性協議測量原理雷達物位儀特點/應用For basic level measurement in liquids, pastes and slurries; non affected by changing media, temperature changes, gas blankets or vapor; For applications with many obstacles.特點Heartbeat Technology SIL 2/3 according to IEC 61508 Safety and reliability with Multi-Echo Tracking HistoROM RFID TAG for easy identification Very small beam angle電源/通信2-wire (HART)頻率W-band (~80 GHz)測量精度+/- 1 mm (0.04 in)環境溫度-40…+80 °C (-40…+176 °F)過程溫度-40…+130 °C (-40…+266 °F)過程壓力（絕壓）/**過壓限定值Vacuum …16 bar (Vacuum … 232 psi)主要接液部件PTFE antenna PP or 316L process connections過程連接Thread: G1-1/2", MNPT1-1/2"; Flange: UNI DN80…DN150 (3"…6")**測量距離50 m (164 ft)通信4…20 mA HART, Additional switch 證書和認證ATEX,  IEC Ex安全認證SIL 2, SIL 3設計認證EN 10204-3.1選項Display Customized parameterization Gas-tight feed through PWIS free  應用限制Process temp. > 130°C (266°F) -> FMR62 Very aggressive media -> FMR62 Strong turbulences and foam, stilling well and bypass -> FMR5x, FMP5x

產品介紹：Micropilot FMR20進行連續非接觸式物位和流量測量(通過線性化表)，特別適用于水和污水行業，以及各行業中的公用工程?？梢酝ㄟ^HART調試，或使用藍牙? app或遠程顯示單元無線調試。使用app可以在每臺支持藍牙?的智能手機或平板電腦(iOS、Android)上顯示信號曲線。采用一體式結構設計，配備****的芯片，儀表可以安裝狹小空間中使用。通過HART調試，或使用藍牙? app或遠程顯示單元無線調試的非接觸式雷達配備****的雷達芯片設計的超緊湊型雷達，滿足狹小空間應用要求**性價比的雷達特別適用于水和污水行業，以及各行業中的公用工程(IP66，68 / NEMA4x，6P)整體PVDF材質的外殼可以在戶外安裝使用，密封接線和整體封裝電子部件完全防水，可以在惡劣工況條件下使用簡單設置三個主要參數即可滿足大多數應用要求通過藍牙?實現簡單安全的無線遠程訪問，即使在危險區中或狹小空間中使用進行連續液位測量和流量測量(在明渠或測量堰中，通過線性化表)的雷達?？梢栽趦?、敞口池、泵站或下水池中使用。過程連接：螺紋，法蘭過程溫度：-40...+80°C (-40...+176°F)過程壓力：-1...+3bar (-14.5...+4**si)**測量范圍：10 m (33 ft)、20 m (66 ft)測量精度：± 2 mm (0.08")工作頻率：26 GHz國際防爆認證測量原理雷達物位儀特點/應用- Water & Wastewater (e.g. basins / channels / rivers / dams / lift  stations / storm water basins / pump control) - Utility applications in all industries - Storage tanks特點Bluetooth? commissioning, Operation and maintenance SmartBlue App 電源/通信2-wire (HART, 4…20 mA), Bluetooth? wireless technology and App (optional) 頻率K-band (~26 GHz)測量精度+/- 2 mm (0,08")過程溫度-40…+80°C (-40…+176°F)過程壓力（絕壓）/**過壓限定值-1…3 bar (-14,5…43 psi)主要接液部件PVDF, PBT過程連接Thread: G1", NPT1"; G1 1/2", NPT1 1/2", G2", NPT2", Flange: UNI DN80….DN150 (3"…6") **測量距離10m (DN40); 20m (= >DN80)通信4...20mA HART Bluetooth? wireless technology證書和認證ATEX, CSA C/US, IEC Ex, NEPSI選項Remote operation via SmartBlue App using Bluetooth?, Remote HART indicator RIA15 in order structure, Flooding protection tube, Different mounting possibilities 應用限制FMR5x; Ammoniacal gas phase: FMR54 in stilling well; Strong build-up formation: FMR54 with air purge; Only PTFE resistant: FMR52; Custody transfer measurement: FMR5xx or NMR8x

The Series LTS Tilt Switch probes are able to sense either the presence or absence of material when other sensors won't work due to bin vibration, or actual walls aren't available for mounting other types of measuring units. The probes are designed for use where the bulk material to be sensed is exposed or open. Typical applications include high or low level detection in large hoppers, silos, crushers, or trippers, high level control under stackers, and detection of plugged conditions at conveyor transfer points. Series LTS probes can also be used to detect the presence or absence of bulk material on belt conveyors, on chutes to indicate product flow, and to aid in loading rail cars or trucks.All probe models are airtight, dust tight, and waterproof. The compact probe should be used for applications involving small bins and hoppers where space is limited, while the heavy duty probe should be used for applications where a heavy duty abrasion-resistant probe is necessary.

產品介紹：Pointek CLS 100是緊湊的二線制反相頻移電容開關，適于在空間有限的場合內檢測界面固體、液體、漿料和泡沫等。CLS 100 尺寸緊湊，插入深度 100mm，適用于容器或管道等多種應用場合，是傳統電容開關的替代品。它的先進的頂端傳感技術提供了精確的、重復性高的點式物位信號。探頭材質為耐化學腐蝕的 PPS(PVDF 可選)，工作溫度：-30 ~ 100 °C。全密封緊湊的設計使之能夠工作在攪拌釜等振動場合，可靠性高，抗振動可達 4g。當使用一個防研磨保護罩時，CLS 100 可以保護它免受剪切、沖擊和磨損等惡劣的粗糙工藝的影響。PointekCLS 100 有三種類型可供選擇，不銹鋼工藝連接的整合電纜式，探頭材料可選 PPS 或 PVDF；全封裝型，有熱塑聚酯外罩，PPS 過程連接結合 PPS 探頭；標準外罩型，有熱塑聚酯外罩，不銹鋼過程連接結合 PPS 或 PVDF 探頭。。主要應用：相對高壓和高溫、危險區域中的液體、漿料、粉塵、食品和制藥、石化詳情 范圍100mm 過程溫度-30 ~ 100 °C過程壓力10 bar g特點■  易于安裝，內置發光二極管 LED■  沒有可動部件，低維護■  靈敏度調節■  有內置電纜式或 PBT外罩型■  本安型，防塵防爆型和普通型

產品介紹：Pointek CLS200是一個反相頻移式電容物位開關，它可選桿式/纜式和可選配置輸出。它適用于檢測液體，固體，泥漿，泡沫和界面。數字型(帶PROFIBUS PA)包含一個顯示器，和先進的診斷功能。供應的Pointek CLS200有標準型和數字型。標準型有3個帶基本繼電和固態開關警報的LED指示器。數字型帶LCD顯示和PROFIBUS PA通訊。電源是電隔離的，適用的電壓范圍很廣 (12 至 250 V AC/DC)。當與熱隔離器一起使用時，由于探頭部分的材料是不銹鋼和 PPS（PVDF 可選）的，則在工作過程中探頭接液部分的額定溫度**可達到 125 °C。 通過檢測振蕩頻率的變化，開關可響應任何介電常數大于等于 1.5 的介質，同時它可設置為接觸探頭前檢測或接觸探頭時檢測。CLS200 的工作獨立于罐壁或管道，在不導電容器（如：混凝土或塑料）中進行物位探測時，它不需要外部參比電極主要的應用：液體，泥漿，粉末，顆粒劑，帶壓應用，危險區域。詳情范圍棒：5.5m電纜：30 m過程溫度 -40 ~ 125 °C過程壓力棒：25 bar g電纜：10 bar g特點一體式結構保護信號電路不受沖擊，振動，濕度和 / 或冷凝水的影響耐化學腐蝕物位檢測不受罐壁或管道地面參考的影響基于高頻振蕩，對物料堆積不敏感高靈敏度允許安裝在大量的液體、固體或漿體應用中LCD顯示，能夠實現簡單的菜單驅動設置可獲得擴展棒、電纜和衛生型標準型：3個LED指示器可用于調整控制、輸出狀態和功率 數字型：集成LCD顯示和PROFIBUS PA通訊

產品介紹：Pointek CLS 500是檢測界面、固體、液體、漿料和粘稠介質物位的反相頻移電容物位計，它可以工作在過程溫度高達 400 °C 和壓力高達 150bar 的苛刻工藝條件下。CLS 500 帶 HART? 通訊可遠程設定和檢查。它的基于微處理器的電子單元可在工程生產不停止的條件下進行單點校準和設定。＊＊的有效屏蔽技術保證了測量不受蒸汽、介質掛料、粉塵和冷凝物的影響。獨特的探頭設計和高性能的變送器使 CLS500 在物位檢測的許多領域都有很好的性能。主要應用：油水界面，泡沫或液體 / 泡沫液位，甘醇再生器，高壓反應器、LPG/LNG 應用。詳情范圍1m過程溫度 -60 ~ 400 °C過程壓力150 bar g特點＊＊的有效屏蔽技術可以使測量不受有效屏蔽段中材料堆積或立管的影響2 線制回路供電，固態開關或 4 ~ 20/20 ~ 4 mA 輸出簡易的按鈕調校和內置本地顯示＊＊的有效屏蔽技術獨特的反相頻率提供高精度，HAR通訊適用遠距離運行或檢查

The Model CTF Mini Tuning Fork Level Switch is an ideal choice for level control of powders. The CTF incorporates a piezoelectric crystal that vibrates the fork at its natural frequency. When the fork comes in contact with a material, the vibration is dampened and the switch changes state. As the fork becomes free of material, the switch changes back to its normal state. The unit is not affected by vibration from conveying systems, motors, or the movement of material. Its compact size and DIN connection allow for application in places a larger tuning fork level switch may not be suitable, providing great versatility.The Model CTF is easy to use with no calibration required, and no mechanical moving parts mean no routine maintenance. The CTF is not affected by the dielectric constant of the sensed material, making it superior to a comparable capacitance level switch for applications where the dielectric constant is low, more than one material is being used in the single vessel, and when material moisture content can change. The level switch is also great for applications when the bulk density is too low for a rotating paddle level switch, making it the ideal choice for low density bulk solids and liquids. Comes standard with a user friendly PNP/NPN configurable output.

The Model TFLS2 Compact Tuning Fork Level Switch is an ideal choice for level control of powders. The TFLS2 incorporates a piezoelectric crystal that vibrates the fork at its natural frequency. When the fork comes in contact with a material, the vibration is dampened and the switch changes state. As the fork becomes free of material, the switch changes back to its normal state. Featured in the TFLS2 is user selectable fail-safe operation of the contacts. The unit is not affected by vibration from conveying systems, motors, or the movement of material. Its compact size allows for mounting in places a larger tuning fork level switch may not fit, providing great versatility. The Model TFLS2 is easy to use with adjustable calibration, and no mechanical moving parts means no routine maintenance. The TFLS2 is not affected by the dielectric constant of the sensed material, making it superior to a comparable capacitance level switch for applications where the dielectric constant is low, more than one material is being used in the single vessel, and when material moisture content can change. The level switch is also great for applications when the bulk density is too low for a rotating paddle level switch, making it the ideal choice for low density bulk solids